GCI MARSEILLE TILES
         
STANDARD MARSEILLE
    
ANGULAR 3-WAY APEX
    
ANGULAR 4-WAY APEX
    
ANGULAR RIDGE TILE
       ANGULAR RIDGE CONNECTOR       ANGULAR RIDGE ELBOW  
A classic profile that never goes out of style, Marseille's double-valley shape creates a distinctive look every time. Interlocks at head and side for maximum protection against the harshest weather. Used to cover a 3-way intersection where roof ridge meets with 2 hips. Used at the peak of 4-sided pyramid roof where 4 hips meet. Used on horizontal / main ridge formed by 2 roof slopes and on inclined ridge formed by 2 adjoining sloped roofs. Internal width 220mm. Coverage: 3 pieces / metre. Used when Angular Ridge End Cap fixed at both roof ends or connection with Elbow Tile. Used at the bend (135°) of a horizontal / main ridge.
                     
         
  ANGULAR RIDGE END       ANGULAR RIDGE END CAP       EXHAUST TILE       MARSEILLE HALF TILE       MARSEILLE HALF DOUBLE TILE       MARSEILLE DOUBLE TILE  
Starter tile at eaves area of a roof hip. It gives an aesthetic finishing and water-tightness. Used for capping horizontal ridge ends. It overlaps on both Left and Right Verge Tiles to provide a good finish. Sits on top of UPVC vent pipe. It connects UPVC vent pipe via a PVC reducer to collar tile and ceramic vent set. Removes flashing need around UPVC air vent pipe. For roof pitch 25° - 45°. Starter tile at extreme right of even row for staggered installation of a straight roof. Used at extreme left of even row for staggered installation of a straight roof. Used at left edge of a straight roof to give a similar finish at left edge of roof.
                     
               
  MARSEILLE VENTILATION TILE       TAPER V-SHAPED VERGE       VALLEY TILE                          
Facilitates air flow below the roof. It prevents water condensation and humidity on underside of tiles. Installed across a roof slope at 5-feet spacing and at the 5th or 6th row from roof ridge. If used together with Ridge Connecting Tiles and/or Ventilation Tape, it greatly improves roof ventilation and brings down roof temperature. Alternative to verge tiles. Used for both right and left roof edges. It overlaps on Standard and Double Tile. Gives more lapping allowance; unlike verge tiles where roof width must be exact for proper installation. It is suitable in re-roofing of old roof where roof width and fascia boards are fixed and not adjustable. Laid over metal valley gutter to give a better finish to roof valley. It allows proper seating and securing of cut tiles with cement mortar. For roof pitch of 20° - 40°.