Accessory Interlocking Roofing Tiles

Accessory Tiles_____________________________

Elbow

Used at the bend (135°C) of a horizontal/ main ridge.

3-Way Apex

Used to cover a 3-way intersection where roof ridge meets with 2 hips.

Ridge Tile

Used on horizontal/ main ridge formed by 2 roof slopes. Internal width 220mm. Coverage 3 pieces/ metre.

Hip Tile

Used on inclined ridge i.e. Hip formed by 2 adjoining sloped roofs. Taper shape with internal width 140mm at head and 190mm at tail. 3 pieces/ metre.

Hip End

Starter tile at eaves area of a roof hip. It gives aesthetic finishes and water-tightness.

Standard Tile

Eaves Joint

Used where 2 roof eaves join for Hip End/ Ridge End to rest on it. Provides better finishing and water-tightness.

Ventilation Tile

Facilitates air flow below the roof. It prevents water condensation and humidity on underside of tiles. Installed across a roof slope at 5-feet spacing and at the 5th or 6th row from roof ridge. If used together with Ridge Connecting Tile and/ or Ventilation Tape, it greatly improves roof ventilation and brings down roof temperature.

Valley Tile

Laid over metal valley gutter to give better finish to roof valley. It allows proper seating and securing of cut tiles with cement mortar. For roof pitch of 20° - 40°.

Eaves Standard Tile

Used at the bottom-most row of the roof i.e. eaves. It prevents vermins and bats from entering. It also provides a solid and elegant finish to roof eaves.

Eaves Double Tile

Same as Eaves Standard Tile but used only at left roof edge to match Double Tile.

Double Tile

Used at left edge of a straight roof to give a similar wave finish at left edge of roof.

Left Verge Tile

Same as Right Verge Tile but used at beneath Double Tile on left hand side of roof.

Right Verge Tile

Provide water-tightness to roof edge and lends a solid appearance. Fixed onto wooden fascia board beneath Standard Tiles on right hand side of roof.

Ridge End Cap

Used for capping horizontal ridge ends. It overlaps on both Left and Right Verge Tiles to provide a good finish.

Exhaust Tile

Sits on top of UPVC vent pipe. It coonects UPVC vent pipe via a PVC reducer to collar tile and ceramic vent set. Removes flashing need around UPVC air vent pipe. For roof pitch 25° - 45°.

Ridge Connecting Double Tile

Same as Roof Connecting Standard Tile but used at only at left roof edge to match Double Tiles.

Ridge Connecting Standard Tile

Used at topmost row of roof below Ridge Tiles. Eliminates use of cement mortar. Facilitates escape of warm air from below the roof thus improves roof ventilation.

We also offer various types of accessory tiles. Place your mouse over the section of the roof that you wish to know more.

Other Accessories____________________________

	Clear Roofing Tile Gives you the flexibilty of brightening up spaces and promoting greens wherever you want in your home. More ...
	Universal Capping Used universally to cap multi-forked ridge/ hips e.g. 5-way, 6-way, 8-way to provide water-tightness. Available in 2 versions for connecting or cone-shaped apex.
	Snow Stopper Used in countries where snow fall.
	Antenna Tile In places where tall TV aerial are used, this is used to tie stay wires which holds tall TV aerial rod in position. To secure the tile properly, tie underside of tile with wire to truss/ batten. Can also be used to tie copper tape (for lighting protection).
	Ridge End Starter tile at eaves area when Ridge Tiles are used for roof hip.
	Taper V-Shaped Verge Alternative to vertical verge tiles. Used for both right and left roof edges. It overlaps on Standard and Double Tile. Gives more lapping allowance; unlike verticle verge tiles where roof width must be exact for proper installation. It is suitable in re-roofing of old roof where roof width and fascia boards are fixed and not adjustable.
	4-Way Apex Used at the peak of 4-sided pyramid roof where 4 hips meet.
	Heat Diffusable Underlay
	Aluminium Ridge/ Hip Ventilation Tape (5m/roll) Provides a quick and easy alternative to ridge/ hip installation without use of cement mortar. Facilitates better roof ventilation since warm air escapes through tiny holes on both sides of tape. Available in various colours to roof tiles.
	Aluminium Flashing Tape
	Aluminium Final Strip For Flashing Tape
	Profiled Metal Flashing GI flashing cut to match wave profile of 'S' Pantiles. Seals off through to vermin.
	Aluminium Eaves Comb (1m/ piece) Alternative way to prevent vermin/ bats from entering roof when Eaves Tiles are not in use. Nail Eaves Comb to top edge of fascia board or eaves batten. Lay standard tiles over it. Allow combs to stand where gap exists.